Skip to product information
Flat trivet

Flat trivet

¥8,800
Taxes included. Shipping calculated at checkout.

This product is a replacement trivet that can be attached to Snow Peak flat burners. It can be used in place of the original product.

titanium

stainless

Black dyeing

Suitable for any table

It becomes flat, so it is easier to use cookware.

Specification

● Details

FR234 Iron (black dyed) trivet, thickness 5mm, 480g
FR234SUS Stainless steel trivet, thickness 5mm, 492g
FR234Ti Titanium trivet, thickness 5mm, 293g

● Notes

  • Load capacity limit:

The flat burner is compatible with pots with a diameter of 23cm or less and a capacity of 5L or less. Dutch ovens cannot be used. (*Pots over 23cm can be physically used, but please use them within the recommended range.)

  • Material characteristics:

Titanium and stainless steel: They will discolor in flames, but any oil or grease on them will cause unevenness, so we recommend cleaning them with a neutral detergent before use.

  • Steel (black finish):

Moisture and heat can cause rust and peeling, so apply oil after use to prevent rust.

  • Regarding rust on SUS and iron products:

There may be some rust due to the manufacturing and storage process, but this will not affect the use of the product. Iron products are coated with rust inhibitor before shipping.

  • About the Quality:

If the pot or pan is unstable due to distortion caused during the manufacturing process or due to deterioration over time, turn it upside down or use a hammer to correct any loose parts.

  • Traces of processing:

There may be burn marks from laser cutting or scraping marks from deburring, but this does not affect use. Titanium is hard, so thin areas from the blasting process may remain. Stainless steel may also rust depending on the usage environment.

Disclaimer
Please purchase and use this product at your own risk. We are not responsible for any malfunctions that may occur to the flat burner itself due to use. Thank you for your understanding.

Please perform proper maintenance and use the product safely.

● Sales start date

September 2022: Black iron and titanium launched
October 2022: Stainless steel release
February 2023: Black dyeing released
September 2023: Stainless steel finish changed from sanding to blasting.
November 2023: Blasting added to black dye finish

Featured Products